Table of Contents
Anchor-Tech High Temperature Ceramic Fiber Standard Blanket
01. Product Description
Anchor-Tech Ceramic Fiber Standard Blanket is a continuous noil flat-laid fiber blanket that has a higher tensile strength and a flat surface after double-sided needle punching. The standard blanket does not contain organic binders.
Anchor-Tech ceramic fiber standard blanket has good resistance to chemical attack (except hydrofluoric acid, phosphoric acid and strong alkalis such as Na₂O and K₂O )
Anchor-Tech Ceramic Fiber Standard Blankets are not affected by oil or water . They can be dried to restore their thermal and physical properties.
02. Melting of raw materials – fiberization
03. Characteristics of Anchor-Tech Ceramic Fiber Standard Blanket
|
|
1260 Blanket |
|
|
Operating temperature(℃) |
1100 |
|
|
Density (kg/m3) |
96-128 |
|
|
Linear shrinkage (%) × 8h |
1.6 |
|
|
Tensile strength(MPa) |
0.1~0.12 |
|
|
Thermal conductivity (W/m·k) |
at 400℃ |
– |
|
at 600℃ |
0.13 |
|
|
at 800℃ |
0.18 |
|
|
at 1000℃ |
– |
|
|
at 1200℃ |
– |
|
|
chemical composition(%) |
ZrO2 |
– |
|
Al2O3 |
46.0 |
|
|
Al2O3+SiO2 |
99.0 |
|
04. Typical Applications
① Kiln lining, boiler insulation heat treatment temperature control | Glass kiln roof insulation, furnace door sealing, flue lining
② Pipeline insulation, insulation components in transportation equipment | Fireproof household appliances heat sealing gaskets
③ Thermal stress relief insulation at outdoor welding hot welds | 
high temperature filter media
④Nuclear power insulation | Steam and gas engine insulation
⑤ Thermal resistance components for the automotive industry | On-site welding
