Anchor-Tech Ceramic Fiber Bulk

Anchor-Tech ceramic fiber bulk is made of selected high-quality raw materials, melted at high temperature, sprayed/ spun into fibers , and pressed into shape. The safe use temperature is higher than 1000℃. Today Anchor-Tech will take you to learn about high-quality ceramic fiber bulk!

1. Classified by temperature resistance

① Standard ceramic fiber bulk is made of hard clay clinker as raw material and produced through resistance furnace melting, blowing or spinning .

② High-purity, high-aluminum ceramic fiber bulk and high-purity alumina silica powder synthetic materials are used as raw materials. It is produced through resistance furnace melting, blowing or spinning fiber forming processes.

③Zirconium ceramic fiber bulk is made of high-purity alumina silica powder and zirconium yarn as raw materials, and is produced by resistance furnace melting, blowing  or spinning fiber forming processes.

2. Classification by extended products

①Ceramic fiber bulk can be made into ceramic fiber blankets through double-sided needle punching process , and the blanket can be made into ceramic fiber modules according to certain specifications and pressure;

② Using ceramic fiber bulk as raw material, adding a binder for spraying, it can be made into ceramic fiber spray paint;

③ Use ceramic loose bulk as raw material, add binder to make pulp, and adopt wet vacuum forming process to make ceramic fiber board;

 ④Ceramic fiber bulk combined with other high-temperature resistant aggregates can be made into ceramic fiber lightweight castables, etc.

3.Practical application

① Sandwich filling of equipment.

② Raw materials for fiber castables, coating materials, spray coatings, fiber paper, etc.

③Raw materials for vacuum forming products.

④ Glue-containing ceramic fiber is the raw material for dry-process boards, tube shells and special-shaped components.